DAS8460 6 to 36 Channel Thermal Paper Data Acquisition Solution

The Sefram 8460 is a High-Speed Thermal Paper Data Acquisition Solution with 270 mm paper that enables you to acquire multiple parameters: Voltage, Current (with shunt or Clamp), Temperature (thermocouples), measurements on sensors (e.g. 0-10V; 4-20 mA), etc.. You can set up your own channel configuration from the 4 input boards available: 6ch Universal Board, 6ch Universal High Voltage board, 6ch Strain Gauge board and 12ch Multiplexed boards. With suitable channel configuration you can record from 6 up to 36 channels and 16 logical inputs. Long term measurements with a sampling rate of 1MHz are possible by taking full advantage of the 500GB internal hard disk memory. With a special integrated function of Power Analysis you can record all your parameters on a Single-Phase and Three-Phase network (50Hz, 400Hz and 1kHz). This Data Acquisition Solution can be remotely controlled by USB, Ethernet or WiFi connection and the results can analysed on license-free software from Sefram.

Sefram 8460 combines autonomy, power and simplicity to provide you the right answer for your recording needs.

Common features:

• • TFT panoramic LCD touch screen (15″4)
  • 6 to 36 analogue channels
  • Up to 3 measurement boards
  • 16 logical channels
  • 270mm thermal paper printer
  • 128 Mword memory, with segments
  • Internal hard disk : 500 Gb
  • Intuitive man-machine interface
  • Power Analysis function (50Hz, 400Hz and 1kHz) – single and dual networks
  • Interfaces : 4 x USB, Ethernet, VGA
  • Various measurement functions
  • Remote control
  • Supplied with licence free Sefram Viewer software for data transfer and analysis
  • Safety: 600V CAT III (depending of boards)

6 isolated input universal board:

• • 6 isolated analogue channels
  • 14 bit, 1 Ms/s, Bandwidth: 100kHz
  • DC, RMS AC+DC Voltage (+-500V)
  • Frequency, Thermocouples

6 isolated high voltage board:

• • 6 isolated high voltage analogue channels
  • 14 bit, 1 Ms/s, Bandwidth: 26kHz
  • DC, RMS AC+DC Voltage (+-1000V)
  • Frequency

6 isolated differential input board – Strain Gauge

• • Measurement of strain gauge bridges (4 and 6 wires) and half-bridge
  • Voltage up to 50V, thermocouples
  • 16 bit, 100ks/s, bandwidth 18kHz

12 channels multiplexed board

• Voltage up to 50V AC, DC
• Pt100, thermocouples
• 16 bit, 5ks/s, bandwidth 1kHz

Options:

• IRIG board
• WiFi interface